Day 103 – Monday 30^th June 2008

      Fitted new heater hose, horn and petrol line

Day 104 – Tuesday 1^st July 2008

      Fitted ignition switch, dip switch and light switch

      Painted heater unit in black

Day 105 - Wednesday 2^nd July 2008

      THE BIG DAY – Starting the engine

      Engine fired first – needed ignition advancing to run smoothly. Good oil pressure.

Day 106 – Thursday 3^rd July 2008

      Painted steering column

      Carried on fitting wiring loom

      Rubbed down interior

      Painted heater pipe covers and petrol tank straps in primer

Day 107 – Friday 4^th July 2008

      Rubbed down interior and sprayed it again

      Started fitting dashboard trim (lower)

Day 108 – Monday 7^th July 2008

      Fitted steering column

Day 109 – Tuesday 8^th July 2008

      Fitted sound proofing to the front bulkhead

      Fitted ignition switch and window wiper switch

Day 110 – Wednesday 9^th July 2008

      Fitted heater

      Fitted heater control

      Fitted carpet to the front bulkhead

      Fitted bonnet pull

Day 110 – Thursday 10^th July 2008

      Fitted headlight switch

      Fitted petrol pump in boot for ease of access.

      Fitted petrol tank and straps

      Painted off-side boot floor support panel in primer

 Day 111 – Friday 11^th July 2008

      Painted boot support panel in black

      Cut out new sound proof material for bulkhead above parcel shelf

Day 112 – Monday 14^th July 2008

      Fitted offside boot support panel

      Fitted window screen wiper motor and assembly

      Ran engine to check water temperature – Adjusted carburettor float level

      Fitted sound proofing to upper bulkhead

      Started to fit trim to the upper dashboard and fitted the near-side screen vent

Day 113 – Tuesday 15^th July 2008

      Fitted near side heater pipe to vent

Day 114 – Friday 18^th July 2008

      Filled off-side rear quarter panel

      Started to fill door bottoms

      Filled depressions in bonnet

      Removed rust from underneath of offside waist line trim and treated with tanic acid

      Continued flatting filler

      Removed number plate and badges from boot lid

Day 115 – Monday 21^st July 2008

      Rubbed down paint of boot lid

      Continued to rub down body and doors

Day 116 – Wednesday 23^rd July 2008

      Continued to rub down doors

      Flatted filler on bonnet and built up where needed

Day 117 – Thursday 24^th July 2008

      Continued to rub down and build up filler

Day 118 – Friday 25^th July 2008

      Continued flatting and filling

Day 119 – Tuesday 29^th July 2008

      Continued flatting and filling

Day 120 – Wednesday 30^th July 2008

      Continued flatting and filling

Day 121 – Thursday 31^st July 2008

      Continued flatting and filling

Day 122 – Friday 1^st August 2008

      Continued flatting and filling

      Vacced out car for inspection by paint sprayer.